CHAPTER 4
214
Graphics
In general, the operators that set graphics state parameters simply store them un-
changed for later use by the painting operators. However, some parameters have
special properties or behavior:
•
Most parameters must be of the correct type or have values that fall within a
certain range.
•
Parameters that are numeric values, such as the current color, line width, and
miter limit, are forced into valid range, if necessary. However, they are
not
ad-
justed to reflect capabilities of the raster output device, such as resolution or
number of distinguishable colors. Painting operators perform such adjust-
ments, but the adjusted values are not stored back into the graphics state.
•
Paths are internal objects that are not directly represented in PDF.
Note:
As indicated in Tables 4.2 and 4.3, some of the parameters—color space, color,
and overprint—have two values, one used for stroking (of paths and text objects)
and one for all other painting operations. The two parameter values can be set inde-
pendently, allowing for operations such as combined filling and stroking of the same
path with different colors. Except where noted, a term such as
current color
should
be interpreted to refer to whichever color parameter applies to the operation being
performed. When necessary, the individual color parameters are distinguished ex-
plicitly as the
stroking color
and the
nonstroking color.
4.3.1 Graphics State Stack
A well-structured PDF document typically contains many graphical elements
that are essentially independent of each other and sometimes nested to multiple
levels. The
graphics state stack
allows these elements to make local changes to the
graphics state without disturbing the graphics state of the surrounding environ-
ment. The stack is a LIFO (last in, first out) data structure in which the contents
of the graphics state can be saved and later restored using the following operators:
•
The
q
operator pushes a copy of the entire graphics state onto the stack.
•
The
Q
operator restores the entire graphics state to its former value by popping
it from the stack.